Research Interest:
Quantitative Risk Assessment, Chemical Process Safety, Modeling for Process Safety, Process Measurement and Analysis, and Nondestructive Testing and Inspection, Industrial Cybersecurity

Profile:

Research Interest:
oxide and non-oxide ceramics, mechanochemistry, densification, phase transformations and crystal growth during temperature-pressure treatments and material characterization

Profile:
Branko Matovic is a scientific advisor and head of Centre for synthesis, processing and characterization of materials for application in extreme condition. He finished dissertation in Materials Science at the Max-Planck-Institute for Metals Research and the Institute of Inorganic Chemistry at the University of Stuttgart, Germany. He did postdoctoral research at the Centre for Manufacturing of Advanced Ceramics and Nanomaterials, Quins University, Canada.He managed the projects of basic scientific research (2) innovative projects (4), and international projects (5). Currently he is leader of a project of integral and interdisciplinary research and two international projects. He is a member of the editorial board of the journal with SCI list (Processing and Application of Ceramics)He is president of the Serbian Society for Ceramic Materials.

Research Interest:
study of the corrosion fatigue mechanisms in aqueous environments, the study of the surface thin hard coatings effects on the fatigue, contact fatigue and corrosion fatigue behaviour of mechanical components.

Profile:
Sergio Baragetti is Full Professor of Machine Design and Computational Mechanics at the Università degli Studi di Bergamo - Italy. He graduated in Mechanical Engineering in 1994 from Politecnico di Milano. Ph.D in Quality Engineering in 1998, Università di Firenze. His research activities include numerical and experimental study of the effects induced by surface treatments on the fatigue behaviour of mechanical components, the study of the corrosion fatigue mechanisms in aqueous environments, the study of the surface thin hard coatings effects on the fatigue, contact fatigue and corrosion fatigue behaviour of mechanical components. Components and structures analysis: evaluation of the limit load for hydraulic actuators, evaluation of fatigue resistance for innovative railway undercarriages, study and optimisation of conical threaded connections for oil applications, design of devices for fatigue tests, design of crankshafts and connecting rods, design of components for lifting appliances, design of highly accelerated inert vibrating screening units and probabilistic analysis of components and structures. He is the Director of GITT - Centre on Innovation Management and Technology Transfer of the University of Bergamo. He is the Director of the Structural mechanics Laboratory of the University of Bergamo. He is the author of more than 210 papers and patents.

Research Interest:
Controlled/living radical polymerization; RAFT; TERP; Water-soluble polymer; Self-organization; Polymer micelle; Bioconjugate polymer

Profile:

Research Interest:
Mechanical Engineering Design and Mechatronics, Rigid visco-plastic non-linear FEA modelling and analysis

Profile:

Research Interest:
Biomolecular Spectroscopy, Quantum Chemistry, Molecular Modelling, Biosensors,Modern Electronic Structure Computations, ATR–FTIR Spectroscopy, Raman Spectroscopy, DNA/RNA Hypermethylation & Hypomethylation

Profile:
Prof. Dr. Alireza Heidari, Ph.D., D.Sc. is a Full Professor and Academic Tenure of Chemistry at California South University (CSU), Irvine, California, USA. He has got his Ph.D. and D.Sc. degrees from California South University (CSU), Irvine, California, USA. Furthermore, he has double postdocs in Project Management, Oncology, Human Cancer Tissues and Synchrotron Radiation from Monash University, Melbourne, Victoria, Australia and also in Nanochemistry and Modern Molecular Electronic–Structure Computations Theory from California South University (CSU), Irvine, California, USAHe has participated at more than three hundreds reputed international conferences, seminars, congresses, symposiums and forums around the world as yet. Also, he possesses many published articles in Science Citation Index (SCI)/International Scientific Indexing (ISI) Journals.

Research Interest:
light-metals, metal-matrix composites, and electronic materials;Development of new metal based materials for structural and electronic applications

Profile:
Dr Manoj Gupta was a former Head of Materials Division of the Mechanical Engineering Department and Director designate of Materials Science and Engineering Initiative at NUS, Singapore. He did his Ph.D. from University of California, Irvine, USA (1992), and postdoctoral research at University of Alberta, Canada (1992). In August 2017 he was highlighted among Top 1% Scientist of the World Position by The Universal Scientific Education and Research Network. To his credit are: (i) Disintegrated Melt Deposition technique and (ii) Hybrid Microwave Sintering technique, an energy efficient solid‐state processing method to synthesize alloys/micro/nano‐composites. He has published over 455 peer reviewed journal papers and owns two US patents. His current h‐index is 56, RG index is 46 and citations are greater than 12500. He has also co‐authored six books, published by John Wiley, Springer and MRF ‐ USA. A multiple award winner, he actively collaborate/visit Japan, France, Saudi Arabia, Qatar, China, USA and India.

Research Interest:
Mechanics of Fatigue; Fracture Mechanics; Composite Materials; Nano-technology; Electronic Packaging

Profile:

Research Interest:
oxide matrix, purs and doped with rare earth ions, powders and thin films,Structural Analysis: optic and spectroscopic spectroscopique of films, Atomic Force Microscopy, Transmission Electron Microscopy, Scanning electron Microscopy, M-lines Spectroscopy, Rayleigh diffusion, Raman diffusion, fluorescence, absorption measurements. Films Applications : Waveguides, Scintillating Films, Protecting Films, solar cells.

Profile:
Developped in the Engineering Group and Material Processing, GIPMAT (Altamira, since 2003), and Laboratoire de Physico-Chimie des Matériaux Luminescents, UMR 5620 (Lyon, 1998-2002), Material Physics Department (Lyon, 2000-2002) and Metallurgic Analyses Laboratory (ESIQIE Mexico, 1995-1997).2000-2002) and Metallurgic Analyses Laboratory (ESIQIE Mexico, 1995-1997).

Research Interest:
Nanoparticles synthesis; Metal nanoparticles; Metal oxide nanoparticles; Green Synthesis; Atomic Layer Deposition; Sustainable energy; Biomedical applications

Profile:
Professor Erwan Rauwel comes from France where he defended his PhD of Materials Chemistry in 2003 at the University of Caen, CRISMATand then defended his Habilitation in 2012. He held a postdoctoral position Minatec, Grenoble (2004), Research fellow at the University of Aveiro with a Marie Curie EIF grant (2006) and University of Oslo as senior researcher with a Marie Curie support grant (2009) he is now Professor at Tallinn University of Technology, Tartu College and he is more particularly interested in the study of metal and metal oxide nanoparticles for biomedical applications and energy harvesting. He is consulting editor for International journal of Nanomedicine and has been Guest Editor for Special issue on silver nanoparticles. He has published over 57 scientific papers, 4 book chapters and he owns 4 international patents in the field of thin film deposition and nanoparticles synthesis. He is coordinator of a research project on metal nanoparticles applied to biomedical application and is involved in a Centre of Excellence “EQUiTANT” till 2023.

Research Interest:
Metal matrix composites; Mechanical behavior of advanced materials

Profile:

Research Interest:
Organic Chemistry

Profile:
Member of the Iranian Chemical Society, Member of Iranian Nanotechnology, Member of the Scientific Committee of the International Conference on Mining Engineering, Metals and Materials, Member of the Scientific Committee of the first scientific-research conference of development strategies and promote science education in Iran, Membership in referees committee of the first international conference on science and basic research, Member of the referees Committee of international conference on new findings in science, engineering and technology, Member of the Referees Committee the first conference passive defense industry, engineering, science and technology with a view to sustainable development, Member of the Referees Committee the first conference passive defense and sustainable development, Member of the Referees Committee second International Conference and third National Conference on the application of new technologies in engineering science, Membership in the referees Committees the first national Conference Process Engineering and Chemistry. 1-Hold Workshop on the green catalysts as master lecturer at the University of Sistan and Baluchestan in 2014-2015 years. 2-Hold Workshop of investigate the role heterocyclic compounds in drug production as master lecturer at the University of Sistan and Baluchestan in 2014-2015 years. 3-Attended in workshop on mathematical-Chemical with the participation of international teachers in Yazd in 2011-2012. 4-Participation in third National Conference on interdisciplinary sciences summer school in Shiraz in 2011-2012.

Research Interest:
Surface engineering, High temperature materials, Semi-solid processing, Thermomechanical processing of aluminium wrought products (sheet, foil, profiles)

Profile:

Research Interest:
Thin film and, bulk glassy and nanocrystalline alloys;Graphene, CNTS and carbon fibers fabrication and characterizationm,Functionally graded hard ceramic materials,Thin film and, bulk glassy and nanocrystalline alloys;Graphene, CNTS and carbon fibers fabrication and characterization.Functionally graded hard ceramic materials

Profile:

Research Interest:
Magnetic nanoparticle supported metal-based nanocatalysts and nanodrugs; Green synthesis of metal nanoparticles as a recyclable nanocatalyst; N-heterocyclic carbene metal complexes as bioorganometallic drugs and catalysts; Graphene oxide; Carbon nanotubes and graphene nanoribbons in catalysis; Nanotechnology driven synthesis of carboranes and metallocarboranes.

Profile:
Dr. Siddappa Patil is currently working as an Associate Professor at Centre for Nano and Material Sciences, Jain University, Bangalore, Karnataka, India. His research interest includes Nanocatalysis and Drug molecules. He has awarded prestigious fellowships like National Science Foundation Postdoctoral Fellowship, USA, Government of Ireland IRCSET Postdoctoral Fellowship, Ireland, and Visiting Research Scientist, Northern Illinois University, USA, etc. He has vast postdoctoral research experience from around the world including: National Chung-Hsing University, Taiwan, University College Dublin, Ireland, Central Michigan University, Michigan, University of Texas at Arlington, Texas, and Northern Illinois University, Illinois, USA.